SYNERTIAL

SYNERTIAL GLOVES 7, 13, 16

ITEM DESCRIPTION

7-Sensor Gloves:  (Yellow from the above image) Our 7-sensor gloves use interpolation to approximate the untracked finger joints on all but 6 phalanges, which use IMU (Inertial Measurement Unit) sensors; the 7th sensor is for the palm.

13-Sensor Gloves: (Yellow and Green from the above image) Our 13-sensor gloves only leave the finger tips (distal phalanges) for interpolation.

16-Sensor Gloves:  (Yellow, Green and Orange from the above image) All pure data except for the pinky fingertip.

TECHNICAL SPECIFICATIONS

PROCESSING HUB

Extra circuitry (own socket) dedicated to syncing with other MoCap HW

500 FPS on lower number of sensors; Standard 240 or 120 FPS on up to 55 sensors

Start-up in under 6 Seconds

AA Batteries (x4) or wall adapter

Separate sync HW up to 1000 FPS (Standard 29.97 FPS), drawing power from main hub

Access-point agnostic WIFI; buy off-the-shelf router and configure as per your needs

UDP data packets allow multiple PCs tapping into the same access point

12.8cm x 7.8cm x 2cm with locking connectors

Removabe Ethernet socket for WiFi-cluttered environments

SENSORS

IMUs only (Inertial Measurement Units) : 9-axes, gyroscopes, accelerometers and magnetometers

On-board processing on each sensor; yet the smallest sensors in the market

Internal update rate: 500Hz

Gyro range: 2000 degrees/sec

Accelerometer range: 16Gs

Dimensions: 15mm x 10mm x 2mm

OUTPUT INTEGRATION

Bvh and fbx Output Formats

Real Time Plugins: Siemens Jack and PSH, Motionbuilder, Unity, Unreal

GLOVES CLOTH & SIZES

Electronics not attached to glove-cloth / change sizes or replace after washing in minutes

Types: Short fingered and long fingered glove-cloths in SS, S, M, and L sizes

Finger-less gloves for taping sensors and wiring directly onto fingers

Velcro-backed glove-cloth for passive marker attachment

Easy-to-use mini-straps for each phalanx

SYNERTIAL

SYNERTIAL GLOVES 7, 13, 16

7-Sensor Gloves:  (Yellow from the above image) Our 7-sensor gloves use interpolation to approximate the untracked finger joints on all but 6 phalanges, which use IMU (Inertial Measurement Unit) sensors; the 7th sensor is for the palm.

13-Sensor Gloves: (Yellow and Green from the above image) Our 13-sensor gloves only leave the finger tips (distal phalanges) for interpolation.

16-Sensor Gloves:  (Yellow, Green and Orange from the above image) All pure data except for the pinky fingertip.

PROCESSING HUB

Extra circuitry (own socket) dedicated to syncing with other MoCap HW

500 FPS on lower number of sensors; Standard 240 or 120 FPS on up to 55 sensors

Start-up in under 6 Seconds

AA Batteries (x4) or wall adapter

Separate sync HW up to 1000 FPS (Standard 29.97 FPS), drawing power from main hub

Access-point agnostic WIFI; buy off-the-shelf router and configure as per your needs

UDP data packets allow multiple PCs tapping into the same access point

12.8cm x 7.8cm x 2cm with locking connectors

Removabe Ethernet socket for WiFi-cluttered environments

SENSORS

IMUs only (Inertial Measurement Units) : 9-axes, gyroscopes, accelerometers and magnetometers

On-board processing on each sensor; yet the smallest sensors in the market

Internal update rate: 500Hz

Gyro range: 2000 degrees/sec

Accelerometer range: 16Gs

Dimensions: 15mm x 10mm x 2mm

OUTPUT INTEGRATION

Bvh and fbx Output Formats

Real Time Plugins: Siemens Jack and PSH, Motionbuilder, Unity, Unreal

GLOVES CLOTH & SIZES

Electronics not attached to glove-cloth / change sizes or replace after washing in minutes

Types: Short fingered and long fingered glove-cloths in SS, S, M, and L sizes

Finger-less gloves for taping sensors and wiring directly onto fingers

Velcro-backed glove-cloth for passive marker attachment

Easy-to-use mini-straps for each phalanx

Synertial Gloves | Aumentaty Realidad Virtual